When backing up your data, it’s important to keep in mind the transfer rate at which the data is being saved to your backup device. Even if you have a device with plenty of storage space, your data won’t transfer quickly unless your bandwidth is set to the appropriate transfer rate. The importance of bandwidth is critical to seamless browsing.

Based on transferring data from a 1 terabyte device, let’s compare how long it will take with two different bandwidths (10 kilobytes per second and 10 megabytes per second):

Case 1: Transfer Rate of 10 kBps
First, let’s convert all the numbers to bytes:

  1. 1 TB = 1012 bytes
  2. 10 kBps = 104 bytes per second
  3. Dividing 1 TB by 10 kBps is equal to 108s, which is more than 3 years.

Case 2: Transfer rate of 10 MBps
Again, let’s convert the numbers to bytes:

  1. 1 TB = 1012 bytes
  2. 10 MBps = 107 bytes per second
  3. Dividing 1 TB by 10 MBps is equal to 105 s, which is just over 1 day.

Obviously, Case 2 is a much better option. Make sure to pay attention to the units and suffixes involved when discussing bandwidth. Hearing ‘ten megs per second’ can be very misleading because it doesn’t tell you whether or not it’s bits or bytes of data. Remember that 1 byte = 8 bits, so a transfer rate of 10 MBps is equivalent to 80 Mbps, where capital B represents bytes and lowercase b represents bits.

By increasing your bandwidth, you decrease the time it takes to back up your data. Think of it as if you needed to empty a swimming pool; Would you rather empty it with an industrial hose, or a drinking straw?

For more info, click to contact MICCA Solution